Arturia MOOG MODULAR 2.6 - Manual (Page 38)

38 ARTURIA – MOOG MODULAR V 2.6 – USER’S MANUAL
Assign “Driver” oscillators to one of the 4 sequence lines. For this, on the sequencer screen
click a few times on the corresponding LCD display on the bottom of the “Driver”, (on the
right) to select the sequence line :L1, 2, 3 or 4.
Validation of a sequence line on the “Driver” oscillator
On the 2 VCAs, click on the “trigg out” plug to apply a “trigg”, corresponding to the
sequencer output (“Sequencer trigger”), so that it can be taken into account and freely
react, without the help of a keyboard trigger. The sequencer will work on its own when you
start it.
Apply a sequencer output to the VCA (here VCA2)
Now go to the second screen and click on the “On” button situated in the “Oscillator” of the
sequencer. This will play the sequence in a loop.