HP StorageWorks XP10000 Disk Array - Manual (Page 105)

Figure 68 The Syslog Pane
The Syslog pane has the following features:
• Output to Primary Server: Allows you to specify whether to transfer the audit log to the primary syslog
server. If you want to transfer the audit log to the primary syslog server, click Enable. If you do not
want to transfer the audit log to the primary syslog server, click Disable.
• Primary Server Setting: Allows you to specify the IP Address and Port Number for the syslog server
that you want to set as the primary syslog server. When you set Output to Primary Server to Enable,
the IP Address and Port Number fields become available. For both IP Address and Port Number,
the defaults have been entered. They can be changed, if necessary. For the IP Address, you need
to enter four integral numbers, ranging from 0 to 255 (for example, nnn.nnn.nnn.nnn, where n is
numeric). You need to enter only numbers; do not enter periods. For Port Number, you need to enter
an integral number, ranging from 1 to 65,535.
• Output to Secondary Server: Used to specify whether to transfer the audit log to the secondary syslog
server. If you want to transfer the audit log to the secondary syslog server, click Enable. If you do not
want to transfer the audit log to the secondary syslog server, select Disable.
• Secondary Server Setting: Specify the IP address and port number for the syslog server that you want
to set as the secondary syslog server. When you set Output to Secondary Server to Enable, the IP
Address and Port Number fields become available. For both IP Address and Port Number, the defaults
have been entered. They can be changed, if necessary. The restriction for the available values is
the same as that for the Primary Server Setting.
• Location Identification Name: To help identify the array, you can provide a name for the array that
transfers the audit log to the syslog servers. A maximum of 32 one-byte characters can be entered.
Available characters are alphabetic (A-Z and a-z), numeric (0-9), and symbols (including the following:
! " # $ % & ' ( ) = - ~ ^ | \ { } [ ] @ ‘ : ; * + _ ? / < > .). A comma (,) and a space cannot be used.
• Output Detailed Information: Used to transfer the detailed information of the setting information file to
the syslog server as an audit log. If you want to transfer the detailed information to the syslog server,
click Enable. If you do not want to transfer the information, click Disable. In the syslog information file
that is stored in the SVP, the detailed information is always stored regardless of the setting.
• Download Syslog: Click Download to download the syslog information file to the XP Remote Web
Console computer.
• Apply: Click Apply to implement your changes in the Syslog pane. This button is only available
when you are in Modify mode.
• Cancel: Click Cancel to cancel all settings made in the Syslog pane in Modify mode.
HP StorageWorks 105