HP StorageWorks XP10000 Disk Array - Manual (Page 63)

Figure 38 Sample Install/Uninstall Error Detail Pane
Enabling Available XP Remote Web Console Options Automatically
When the licensed capacity exceeds the mounted capacity (or used capacity) because of the reduction
of disk drives, you can automatically enable only the available XP Remote Web Console options with
permanent keys using the Available button. In the License Key pane, Enable is displayed for the available
options in the Available Install column.
Whether the options can be enabled or not using the Available button depends on the relationship
between the mounted capacity of the disk drives and the licensed capacity. Table 13 shows the status of
the Available button.
Table 13 Condition to Enable Available Button
Relationship between Mounted Capacity of Disk
Drives and Licensed Capacity
Availability of the Available Button
Mounted capacity ≤ Licensed capacity Available
Mounted capacity > Licensed capacity Not available
To install XP Remote Web Console options automatically on the XP Remote Web Console using the
Available button:
1. Log on to the SVP to open the XP Remote Web Console main pane.
2. Change to Modify mode.
3. Click Install ( ) on the XP Remote Web Console main pane. The License Key pane is the default
view.
NOTE:
If no XP Remote Web Console options have been installed, this pane opens automatically
when you log on to the SVP.
4. From Mode, click Available.
5. Click Install.
6. In the License Key list, the row of the options that can be enabled changes to blue bold italics and
the Status column changes to Install .
7. If you want to apply the changes to the array, click Apply.
8. Click OK to confirm. The status of the enabled options changes to Installed.
Disabling XP Remote Web Console Options
To disable XP Remote Web Console options on the XP Remote Web Console:
1. Log on to the SVP to open the XP Remote Web Console main pane (see Figure 44 ).
HP StorageWorks 63