Checking memory installation – HP LaserJet 9000 Printer series User Manual
Page 204
Appendix C
Printer memory and expansion
204
Checking memory installation
Checking memory installation
Follow this procedure to verify that DIMMs are installed correctly:
1
Check that the printer control panel displays
READY
when the printer is turned on. If an error message
appears, a DIMM might have been incorrectly installed.
2
Press
22
on the numeric keypad. The configuration page prints.
3
Check the memory section on the configuration page and compare it to the configuration page printed
before the DIMM installation. If the amount of memory has not increased, one of the following situations
might have occurred:
The DIMM might not be installed correctly. Repeat the installation procedure.
The DIMM might be defective. Try a new DIMM, or try installing the DIMM in a different slot.
Note
If you installed a printer language (personality), check the Installed Personalities and Options section
on the configuration page. This area should list the new printer language.