HP LaserJet 9000 Printer series - Manual (Page 73)

Chapter 3 Advanced printing tasks 73
Interrupting and resuming printing
Interrupting and resuming printing
The job interrupt and resume feature lets you temporarily stop the current print job in order to print another job
through a FIR connection. When the FIR job is completed, the interrupted job resumes printing.
To interrupt the job at the printer, connect to the FIR port on the printer and send a job to the printer. The
printer stops printing the current job when it reaches the end of the job it is printing. The printer then prints the
job sent over the FIR connection. When the printer is done printing that job, it resumes printing the original job
where it left off.