HP ProLiant DL360e Gen8 Server User Manual
Page 67
Advertising
Hardware options installation 67
CAUTION:
To prevent improper cooling and thermal damage, do not operate the server unless
all bays are populated with either a component or a blank.
To install the component:
1.
Unfasten the cable management solution to access the power supply bays.
2.
Remove the EMI shield from the power supply bay.
3.
Remove the protective cover from the connector pins on the power supply.
WARNING:
To reduce the risk of electric shock or damage to the equipment, do not connect the
power cord to the power supply until the power supply is installed.
Advertising