Hppp client – HP Tower Uninterruptible Power System User Manual
Page 72
Configuration and operation 72
Status icon
Description
Normal operation
Alarm present
Click the icon to display the UPS alarms.
UPS communication loss
•
Description—The name of the UPS
•
Firmware version—The UPS firmware version
•
Nominal apparent power—The UPS nominal apparent power (in VA or KVA)
•
Serial number—The UPS serial number
•
Class—The communication protocol, for example, RS-232 device, USB device, or HPPP Administrator
•
Link—A hyperlinked icon that directs you to the web interface for the HP UPS Network Module, if
installed, or the HPPP Administrator (
HTTP Connection,
HTTPS Connection, or
Communication Loss)
•
Battery state—The current state of the UPS battery (Charging, Discharging, or Fault)
•
Power source—The current source of UPS power (AC Power or Battery Power)
•
Load level—The current UPS output load level
•
Battery capacity—The remaining UPS battery capacity
•
Battery runtime—The remaining backup time available from the UPS battery
•
Entire UPS—The status of the UPS (
On,
Off,
Unknown, Internal Failure, On Automatic
Bypass, Manual Bypass, Overload)
•
Load segment—The load segment status (
On,
Off, or
Unknown)
HPPP Client
UPS information includes: