HP Tower Uninterruptible Power System - Manual (Page 79)

Configuration and operation 79
Statistics panel
This panel displays a list of calculated statistics.
Statistics are calculated over the specified time period for the following categories:
• Estimated power consumption—The estimated amount of power consumed
• Average apparent power—The average apparent power
• Power lost count—The number of utility power failures that have occurred
• Cumulative power lost time—The total amount of time utility power has been out
• UPS overload—The number of times the UPS has detected an overload condition
To configure the range of time over which statistics are calculated:
1. Click the icon. The Days interval screen appears.
2. Enter the beginning date in the From field, or click the icon to select the date from a calendar.
3. Enter the ending date in the To field, or click the icon to select the date from a calendar.
4. Click Save. The configured interval displays at the top of the panel. The beginning date displays in the
bottom-left corner. The ending date displays in the bottom-right corner.
5. Click the time date and time values in the bottom left and right corners to shift the displayed time
windows back or forward, respectively.
To download a .csv file of the statistical data, click the icon.
Reconfiguring an HPPP power source
If an HPPP Administrator power source needs to be changed, the following requirements must apply:
• The HPPP Administrator was previously configured to a power source.
• One or more HPPP Clients are currently connected to the HPPP Administrator.