Poor print quality and unexpected printouts – HP Officejet Pro K850dn Printer User Manual

Page 87

Advertising
background image

Poor print quality and unexpected printouts

Check the printheads and ink cartridges

Replace any clogged or worn printheads or low ink cartridges (see

Maintaining the printheads

), and

try to print again.

Check the paper quality

The paper might be too moist or too rough. Make sure the media used meets HP specifications (see

Selecting print media

), and try to print again.

Check the type of media loaded in the printer

Make sure the tray supports the type of media you have loaded. See

Understanding

specifications for supported media

.

Make sure you have selected the tray in the printer driver that contains the media you want to
use. See

Changing print settings

.

Check the printer location and length of USB cable

See

Check the printer location and length of USB cable

.

Meaningless characters print

If an interruption occurs to a job that is printing, the printer might not recognize the rest of the job.

Cancel the print job and wait for the printer to return to the ready state. If the printer does not return
to the ready state, cancel all jobs, and wait again. When the printer is ready, resend the job. If
prompted by the computer to retry the job, click Cancel.

Check cable connections

If the printer and computer are connected with a USB or parallel cable, the problem might be due to
a poor cable connection or a cable that is not in working condition.

Make sure the cable connections at both ends are secure. If the problem persists, turn off the printer,
disconnect the cable from the printer, turn on the printer without connecting the cable, and delete any
remaining jobs from the print queue. When the Power light is on and not flashing, reconnect the cable.

Check the document file

The document file might be damaged. If you can print other documents from the same application,
try printing a backup copy of your document, if available.

Check the symbol set

If you are using MS-DOS, use the HP DJCP to set the appropriate symbol set for the language of
your document. See

HP Deskjet Control Panel (HP DJCP)

.

Ink is smearing

ENWW

Troubleshooting

79

Advertising