Hp storageworks e2400-fc 4gb interface controller, Hp storageworks ultrium tape drives – HP EML E-series Tape Libraries User Manual
Page 58
gl01011
1
2
Figure 37 Indicators on the e2400-FC 2Gb interface controller
Table 11 Indicators on the e2400-FC 2Gb interface controller
Index
No.
Control/indicator
Function
1
ACT/LNK indicators
ACT indicator—When lit, shows port activity.
nl
LNK indicator—When lit, shows a valid link is established.
2
PWR indicator
When green, power is applied to the module.
When yellow, Power-On-Self-Test (POST) is in process or
processor problems exist.
HP StorageWorks e2400-FC 4Gb interface controller
10973
3
1
2
4
Figure 38 Indicators on the e2400-FC 4Gb interface controller
Table 12 Indicators on the e2400-FC 4Gb interface controller
Index
No.
Control/Indicator
Function
1
Beacon
Use to locate the card.
2
ACT/LNK indicators
ACT indicator—When lit, shows port activity.
nl
LNK indicator—When lit, shows a valid link is established.
3
PWR indicator
When green, power is applied to the module.
When yellow, Power-On-Self-Test (POST) is in process or processor
problems exist.
4
Reset hole
To reset the card, insert a paper clip into the hole.
HP StorageWorks Ultrium tape drives
58
Using the library