Step 3: plug in the power – HP Deskjet 832c Printer User Manual
Page 12
4
Setting Up Your Printer with a Parallel Printer Cable
1
Step 3: Plug in the Power
1
Leave the computer and the printer turned off.
2
Lift open the cable access door on the back of the printer.
3
Plug the power adapter’s cord
firmly into the connector on the
back of the printer.
4
Plug the appropriate end of the
power cord into the power
adapter.
5
Plug the other end of the power
cord into an electrical outlet.
Note:
If using an HP JetDirect External Print Server with your HP DeskJet
895C Series printer, go to “Setting Up Your Printer on a Network” on page 89.
6410023
Note:
Use only the Power
button on the front of the printer to turn the
printer on and off. Using a power strip, surge protector or a wall outlet switch
to turn the printer on and off may cause premature failure.
dj895c.book Page 4 Monday, July 12, 1999 11:31 AM