HP ProLiant DL760 Server - Manual (Page 17)

Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: b-ch1 Server Features.doc Last Saved On: 1/24/01 4:43 PM
Chapter
1
Server Features
Compaq ProLiant DL760 Servers
The Compaq ProLiant™ DL760 server, the ultimate high-density data center
server, delivers breakthrough 8-Way scalable performance for 24x7
multiserver rack environments. The ProLiant DL760 server, which is based on
the ProFusion 8-Way architecture, delivers this performance through state-of-
the-art Intel Pentium III Xeon processor technology, breakthrough scalable
performance of I/O and memory, and the highest levels of fault tolerance and
manageability for the data center.
Performance is maximized with up to 8 Pentium III Xeon processors and
16 Gigabytes (GB) of ECC SDRAM memory. Input/output (I/O) performance
is further enhanced by eight 64-bit PCI-X slots–two of those slots operating at
100 MHz, three 64-bit PCI slots, an Integrated Smart Array Controller (Ultra2
support), and Ultra3 hard drives.
High-availability features include: PCI Hot Plug slots, redundant hot pluggable
power supplies, redundant hot-pluggable fans, redundant processor power
modules, redundant network interface controllers (NIC), Smart Array 4200
controllers, Error Checking and Correcting (ECC) memory, Disk System
Tracking, Disk Drive Fault Tolerance, and Automatic Server Recovery
(ASR2).
Server management and configuration tools important to availability include
SmartStart™, Remote-Flash Redundant ROM, System Interconnect Status
Indicators, Compaq Insight Manager™, Compaq Remote Insight, and Compaq
Server Utility.