HP ProLiant DL760 Server - Manual (Page 87)

Installing Hardware Options - Server Power Off 4-13
Compaq Confidential – Need to Know Required
Writer: Bryce Miller Project: Compaq ProLiant DL760 Servers User Guide Comments:
Part Number: 173774-001 File Name: e-ch4 Installing Hardware Options - Server Power Off.doc Last Saved On: 1/25/01 9:33 AM
3. Remove the memory board by rotating the ejectors outward

and
pulling the board out
.
4. Place the memory expansion board, components facing up, on a flat
surface.
1
1
2
Figure 4-10. Removing the memory board
NOTE: The memory board is part of the system interconnect scheme and must be seated
properly for server startup. For more information see the “System Interconnect Status
Indicators” section in Chapter 7, “Server Power.”
CAUTION: The ejectors prevent the memory expansion board from lying
completely flat. Inserting a DIMM without counter pressure applied behind the
socket to the back of the expansion board can cause the memory expansion
board to flex and could result in damage. Always support the memory expansion
board or apply counter pressure while inserting a DIMM.