HP Officejet Pro 8000 - A811 - Manual (Page 37)

Solve printing problems
This section contains the following topics:
• The printer shuts down unexpectedly
• Alignment fails
• The printer is not responding (nothing prints)
• Printer takes a long time to print
• Blank or partial page printed
• Something on the page is missing or incorrect
• Placement of the text or graphics is wrong
The printer shuts down unexpectedly
Check the power and power connections
Make sure the printer is connected firmly to a functioning alternating current (AC)
power outlet. For voltage requirements, see Electrical specifications.
Alignment fails
If the alignment process fails, make sure you have loaded unused, plain white paper
into the input tray. If you have colored paper loaded in the input tray when you align the
ink cartridges, the alignment fails.
If the alignment process fails repeatedly, you might have a defective sensor or ink
cartridge. Contact HP support. Go to www.hp.com/support. If prompted, select your
country/region, and then click Contact HP for information on calling for technical
support.
The printer is not responding (nothing prints)
There are print jobs stuck in the print queue
Open the print queue, cancel all documents, and then reboot the computer. Try to print
after the computer reboots. Refer to the Help system for the operating system for more
information.
Check the printer setup
For more information, see General troubleshooting tips and resources.
Check the HP software installation
If the printer is turned off when printing, an alert message should appear on your
computer screen; otherwise, the HP software provided with the printer might not be
installed correctly. To resolve this, uninstall the HP software completely, and then
reinstall the HP software.
Solve printing problems 33