Clearing host groups user information – HP StorageWorks XP Remote Web Console Software User Manual
Page 53
. - + @ _ = : / [ ] , ~
•
Re-enter Secret
Specify the secret again for confirmation.
5.
Click the OK button to close the Specify Authentication Information dialog box.
The specified user information for the port appears in blue in the Authentication Information
(Target) list of the Authentication window.
6.
Click the Apply button in the Authentication window.
A message appears and asks if you want to apply the setting to the storage system.
7.
Click the OK button to close the message.
The setting is applied to the storage system.
Figure 34 Specify Authentication Information Dialog Box
Clearing Host Groups User Information
To clear user information for a host group:
1.
Make sure that Remote Web Console is in Modify mode.
2.
Start LUN Manager and display the Authentication window (
).
3.
In the Port tree, expand the Fibre folder and select a port or host group whose user information
you want to clear.
The currently registered user information for the port or host group appears in the Authentication
Information (Target) list.
4.
Right-click any point in the Authentication Information (Target) list and select Clear Authentication
information from the pop-up menu.
Clear Authentication Information dialog box appears and asks if you want to clear the user
information for the selected host group.
5.
Click the OK button to close the Clear Authentication Information dialog box.
The user information for the selected host group disappears from the Authentication Information
(Target) list.
6.
Click the Apply button in the Authentication window.
A message appears and asks if you want to apply the setting to the storage system.
7.
Click the OK button to close the message.
The setting is applied to the storage system.
Setting Fibre Channel Authentication
53