HP Insight Management Agents - Manual (Page 65)

•
Fan Status—Displays the status of the fan subsystem in the drive enclosure, or box. The following
values are possible:
◦ OK—The fan subsystem is working properly.
◦ Failed—A fan has failed and there are not enough fans in the fan subsystem to keep the
enclosure cool. Check your fan subsystem as soon as possible. Continued operation may
cause failure of the drives.
◦ Degraded—A fan has failed but there are still enough fans in the fan subsystem to keep
the enclosure cool.
◦ Unknown—The Storage Agents do not recognize the status of the fan subsystem. You
may need to upgrade your software.
◦ No Fan—This storage system does not have a fan.
•
Backplane Speed—Displays the speed of the storage system backplane. The following values
are possible:
◦ Ultra3—The storage system is capable of Ultra3 speeds.
◦ Ultra320—The storage system is capable of Ultra320 speeds.
◦ Unknown—The Storage Agents are unable to determine the storage system backplane
speed. You may need to upgrade your software.
•
Connection Type—Displays the type of connection between the server and the box. The
following values are possible:
◦ Fibre Attached—This chassis is attached to the server through Fibre Channel.
◦ SCSI Attached—This chassis is attached to the server with a SCSI cable.
◦ SAS Attached—This chassis is attached to the server with a SAS cable.
◦ SATA Attached—This chassis is attached to the server with a SATA cable.
◦ Unknown—The Storage Agents are unable to determine the type of connection.
•
Drive Bays—Displays the number of drive bays provided by this storage system. If duplexing
hardware is used with the storage system, the drive bay number is less than the number of
physical drive bays in the enclosure.
•
Model—Displays the model of the storage system. Use this information for identification
purposes.
•
Board Revision—Displays the board revision level of this storage system backplane.
•
Thermal Status—Displays the temperature status of the drive system. The following values are
possible:
◦ OK—The temperature is within normal operating range.
◦ Degraded—The temperature is outside of normal operating range. Check to make sure
the cover is on the storage system.
◦ Failed—The temperature is outside of normal operating range, and could permanently
damage the system. Ensure that the fans are spinning, and check the room temperature.
◦ Unknown—The Storage Agents do not recognize the thermal status. You may need to
upgrade your software.
◦ No Temperature Monitoring—This storage system does not support temperature monitoring.
Storage agent 65