HP XP Racks - Manual (Page 11)

For more information, see the HP XP7 Remote Web Console User Guide.
Deleting a community name
This topic describes how to delete a community name.
Prerequisite: You must have Storage Administrator (Initial Configuration) role to perform this task.
1.
From the Settings menu, select Environmental Setting - Edit Alert Settings.
2. In the Edit Alert Settings window, select the SNMP tab.
3. In the SNMP Trap Settings, click Community - Delete.
4. Click Finish.
5. In the Confirm window, enter a name for the task, confirm the settings, and click Apply.
For more information, see the HP XP7 Remote Web Console User Guide.
Changing a community name
This topic describes how to change a community name.
Prerequisite: You must have Storage Administrator (Initial Configuration) role to perform this task.
1.
From the Settings menu, select Environmental Setting - Edit Alert Settings.
2. In the Edit Alert Settings window, select the SNMP tab.
3. In the SNMP Trap Settings, click Community - Change.
4. In the Change Community window, enter the new community name in the Community field.
You can use up to 180 alphanumeric characters, except for ", \, ;, :, ,, *, ?, <, >, |, /, ^,
&, and %.
5. Click OK.
6. Click Finish.
7. In the Confirm window, enter a name for the task, confirm the settings, and click Apply.
For more information, see the HP XP7 Remote Web Console User Guide.
Managing SNMP IP addresses
Adding an SNMP Manager IP address
This topic describes how to add the SNMP Manager IP address.
Prerequisite: You must have Storage Administrator (Initial Configuration) role to perform this task.
1.
From the Settings menu, select Environmental Setting - Edit Alert Settings.
2. From the Edit Alert Settings window, select the SNMP tab.
3. Click the Add button in SNMP Managers.
4. In the Add SNMP Manager window, select IPv4 or IPv6 for the IP address.
5. Enter the desired IP address in the IP Address text box.
NOTE: Any IP address that has all values set to zero (0) cannot be specified for IPv4 and
IPv6. The IPv6 address is specified by entering eight hexadecimal numbers that are separated
by colons (:) using a maximum of 4 digits from zero (0) to FFFF inclusive. The default form of
the IPv6 address can be specified.
6. Click OK and the IP address that you entered will be added to the IP Address list in the SNMP
Manager window.
7. Click Finish.
8. In the Confirm window, enter a name for the task, confirm the settings, then click Apply.
For more information, see the HP XP7 Remote Web Console User Guide.
Managing SNMP IP addresses 11