HP XP Racks - Manual (Page 28)

Table 14 SNMP failure trap reference codes (continued)
Alert level Section Description Trap reference code
SIM13 SIM23 SIM22
MODERATE SVP failure SVP receiving voltage error (CL2) 09 E4 BF
MODERATE Processor SAS CTL blocking xx 10 CF
SERVICE Processor A SAS PORT, one of 2WL, is partial blocked xx 11 CF
MODERATE Processor SAS PORT blocked xx 12 CF
MODERATE Processor Logical DMA blocking xx 6x CF
SERVICE Processor DRR TEMPORARY ERROR xx 80 CF
SERVICE Processor DMA temporary error xx 81 CF
MODERATE Processor DRR BLOCKING xx 82 CF
MODERATE Processor DMA blocking xx 83 CF
MODERATE Processor LR blocking xx 88 CF
MODERATE Processor All DMA blocking xx 89 CF
MODERATE Processor MFDMA blocking xx Bx CF
MODERATE Processor Logical DRR blocking xx Dx CF
SERVICE Failure with paired
volumes TC-MF/TC started the initial copy or out of sync for this
volum xx 0x D0
SERVICE Failure with paired
volumes TC-MF/TC completed the initial copy for this volume xx 1x D0
SERVICE Failure with paired
volumes TC-MF/TC for this volume was deleted(Operation from
an SVP/Web Console or a host processor) xx 2x D0
SERVICE Failure with paired
volumes TC-MF completed the Create pair(No copy suspend) xx 6x D0
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Simplex to Duplex Pending) xx 0x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Simplex to Duplex) xx 1x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Duplex Pending to Duplex) xx 2x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Duplex Pending to Suspend) xx 3x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Duplex to Suspend) xx 4x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Duplex to Simplex) xx 5x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Duplex Pending to Simplex) xx 6x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Suspend to Simplex) xx 7x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Suspend to Duplex Pending) xx 8x D1
SERVICE Failure with paired
volumes Remote Copy pair status change (MCU Command) (From
Duplex Pending to Suspend(continue)) xx 9x D1
28 SNMP failure trap reference