HP ProLiant SL230s Gen8 Server - Manual (Page 17)

Operations 17
Install the drive air baffle
1. Install the drive air baffle.
2. Install the server into the chassis (" Installing the server into the chassis " on page 25 ).
3. Connect all peripheral cables and power cords to the rear panel.
4. Power up the server (on page 15 ).
Remove the processor air baffle
1. Power down the server (on page 15 ).
2. Disconnect all peripheral cables from the server.
3. Remove the server from the chassis (on page 15 ).
4. Remove the processor air baffle.