HP ProLiant SL230s Gen8 Server - Manual (Page 7)

Component identification 7
Front panel LEDs and buttons
Item Description Status
1 iLO 4 speed LED Green = LAN connection using a GbE link
Amber = LAN connection using a 10 Mbps/100 Mbps link
Off = No link exists
2 iLO 4 status LED Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
3
NIC 2 status LED Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
4 NIC 2 speed LED Green = LAN connection using a GbE link
Amber = LAN connection using a 10 Mbps/100 Mbps link
Off = No link exists
5 NIC 1/iLO 4 status LED Solid green = Link to network
Flashing green (1 Hz/cycle per sec) = Network active
Off = No network activity
6 NIC 1/iLO 4 speed LED Green = LAN connection using a GbE link
Amber = LAN connection using a 10 Mbps/100 Mbps link
Off = No link exists
7 UID button/LED Solid blue = Activated
Flashing blue (1 Hz/cycle per sec) = Remote management or
firmware upgrade in progress
Off = Deactivated
8 Health LED Solid green = Normal
Flashing amber = System degraded
Flashing red (1 Hz/cycle per sec) = System critical
Fast-flashing red (4 Hz/cycles per sec) = Power fault*
9 Power On/Standby button and system
power LED
Solid green = System on
Flashing green (1 Hz/cycle per sec) = Performing power on
sequence
Solid amber = System in standby