Description – HP XP Array Manager Software User Manual
Page 135
PPCGWWN
[[XP Performance Control-group-name]:[XP Performance Control-group-name]][
…]|
RemoteCopy
|
RCLU
[[port-name.host-group-id]:[port-name.host-group-id]][
…]|
RCLDEV
[[LDKC-CU-id]:[LDKC-CU-id]][
…]|
RCCLPR|
UniversalReplicator
|
URJNL
[[JNL-group-id]:[JNL-group-id]][
…]|
URLU
[[port-name.host-group-id]:[port-name.host-group-id]][
…]|
URLDEV
[[LDKC-CU-id]:[LDKC-CU-id]][
…]|
LDEVEachOfCU
[[[LDKC-CU-id]:[LDKC-CU-id]][
…]|
internal|virtual]|
}
Description
The group command specifies the type of monitoring data that you want to export. This command
uses an operand (such as PhyPG and PhyLDEV above) to specify a type of monitoring data.
shows the monitoring data that can be saved into files by each operand, and the saved ZIP
files. For details on the monitoring data saved in these files, see the tables indicated in the See column.
Table 30 Operands of the group Subcommand and Saved Monitoring Data
See
Saved ZIP File
Monitoring Data Saved in
the File
Window
of Per-
formance
Monitor
Operand
PhyPG_dat.ZIP
1
Usage statistics about parity
groups
Physical
tab in the
Auto LUN
window
PhyPG
PhyLDEV_dat.ZIP
1
Usage statistics about volumes
PhyLDEV
PhyExG_dat.ZIP
Usage conditions about external
volume groups
PhyExG
PhyExLDEV_dat.ZIP
Usage conditions about external
volumes
PhyExLDEV
PhyProc_dat.ZIP
1
Usage statistics about channel
processors, disk processors,
and data recovery and
reconstruction processors
PhyProc
PhyCSW_dat.ZIP
1
Usage statistics about access
paths, write pending rate, and
cache
PhyCSW
PG_dat.ZIP
Statistics about parity groups,
external volume groups, or
V-VOL groups
LDEV tab in
the Auto
LUN
window
PG
XP24000/XP20000 Performance Monitor User Guide
135