HP Scanjet Enterprise 9000 Sheet-feed Scanner - Manual (Page 19)

You can filter out a color channel (red, green, or blue) or up to three individual colors. For
specific colors, the sensitivity setting controls how closely a scanned color must
approximate the specified color.
Removing colors from the scan might reduce the scan file size and improve optical
character recognition (OCR) results.
To select colors to eliminate from a scan in an HP Smart Document Scan Software profile,
follow these steps:
1. Open the HP Smart Document Scan Software.
2. Select a scan profile, and then click Edit profile.
3. On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
4. On the Color Dropout tab of the Properties dialog box, specify the color dropout
settings.
Only the color dropout options available for your scanner are selectable.
For information about the color dropout settings, see the online help for the scanning
software that you are using.
NOTE: The color channel filter only applies to grayscale scans and to black and
white scans. Specific color filters apply to all color modes.
NOTE: Use the ISIS or TWAIN user interface to filter out color when scanning from
third-party scanning software.
Hardware Misfeed (Multipick) Detection
The Misfeed (Multipick) Detection feature stops the scan or copy process if it senses that
multiple pages are fed into the scanner at one time. This feature is enabled by default.
You might want to disable the Misfeed (Multipick) Detection feature if you are scanning
multipart forms (a use that HP does not recommend).
To change the Misfeed (Multipick) Detection setting in an HP Smart Document Scan
Software profile, follow these steps:
1. Open the HP Smart Document Scan Software.
2. Select a scan profile, and then click Edit profile.
3. On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
4. On the More tab of the Properties dialog box:
•
Clear the Enable check box (located under the Misfeed (Multipick) Detection
heading) to disable this feature.
• Select the Enable check box to enable this feature.
NOTE: Use the ISIS or TWAIN user interface to enable misfeed detection when
scanning from third-party software.
Hardware Misfeed (Multipick) Detection 17