Scanner has stopped working correctly, Scanner operation problems – HP Scanjet Enterprise 9000 Sheet-feed Scanner User Manual
Page 30
To reset the scanner, follow these steps:
1.
Close the HP Smart Document Scan Software and HP Scanner Tools Utility, if they
are open.
2.
Disconnect the USB cable that connects the scanner to the computer.
3.
Turn the computer off, wait 60 seconds, and then turn on the computer.
4.
Reconnect the USB cable to a USB port on the back of the computer.
•
Make sure that the USB cable is connected to the back of the scanner correctly.
The trident icon on the USB cable faces up when the cable is properly connected
to the scanner.
•
Try connecting the USB cable to a different USB port on the back of the computer.
Scanner has stopped working correctly
If the scanner stops scanning, follow these steps. After each step, start a scan to see if
the scanner is working. If the problem persists, proceed with the next step.
1.
A cable might be loose. Ensure that both the USB cable and power supply are properly
connected.
Use the cable that was included with the scanner. Another USB cable might not be
compatible with the scanner.
2.
Ensure that the scanner is receiving power.
a. Check that the green LED on the power supply case is on.
b. If the green LED is not on, ensure that power is available to the power outlet or
surge protector that the power supply is plugged into.
c. If power is available to the power outlet or surge protector but the green LED is
still not on, the power supply might be defective. Contact
for assistance.
3.
Unplug the power cable from the power source, wait 60 seconds, and then plug it
back in.
4.
Restart your computer.
5.
Use the Add/Remove tool (in Windows Vista, the Programs and Features tool) from
the Control Panel to uninstall the following applications:
•
ISIS/TWAIN software
•
HP Scanjet Enterprise 9000 Utilities
6.
Reinstall using the HP Scanning Software CD that came with your scanner.
7.
Reconnect the USB cable and power cable to the scanner, and then press the
Power switch to the on position.
Scanner operation problems
•
•
•
Scanner does not scan right away
•
Scanner scans only one side of a two-sided page
•
Scanned pages are missing at the scan destination
•
Chapter 5
28
Troubleshooting