HP Photosmart 7520 e-All-in-One Printer - Manual (Page 33)

Forward faxes to another number
You can set up the printer to forward your faxes to another fax number. A received color fax is forwarded in black
and white.
HP recommends that you verify the number you are forwarding to is a working fax line. Send a test fax to make
sure the fax machine is able to receive your forwarded faxes.
To forward faxes from the printer control panel
1. From the Home screen, touch Settings.
2. Touch Fax Setup, and then select Advanced Fax Setup.
3. Touch Fax Forwarding.
4. Touch On (Print and Forward) to print and forward the fax, or select On (Forward) to forward the fax.
NOTE: If the printer is not able to forward the fax to the designated fax machine (for example, if it is not
turned on), the printer prints the fax. If you set up the printer to print error reports for received faxes, it
also prints an error report.
5. At the prompt, enter the number of the fax machine intended to receive the forwarded faxes, and then touch
Done. Enter the required information for each of the following prompts: start date, start time, end date, and
end time.
6. Fax forwarding is activated. Touch OK to confirm.
If the printer loses power when fax forwarding is set up, it saves the fax forwarding setting and phone
number. When the power is restored to the printer, the fax forwarding setting is still On.
NOTE: You can cancel fax forwarding by selecting Off from the Fax Forwarding menu.
Set the paper size for received faxes
You can select the paper size for received faxes. The paper size you select should match what is loaded in your
main tray. Faxes can be printed on Letter, A4, or Legal paper only.
NOTE: If an incorrect paper size is loaded in the main tray when you receive a fax, the fax does not print and
an error message appears on the display. Load Letter, A4, or Legal paper, and then touch OK to print the fax.
To set the paper size for received faxes from the printer control panel
1. From the Home screen, touch Settings.
2. Touch Fax Setup, and then select Basic Fax Setup.
3. Touch Fax Paper Size, and then select an option.
Set automatic reduction for incoming faxes
The Automatic Reduction setting determines what the printer does if it receives a fax that is too large for the
default paper size. This setting is turned on by default, so the image of the incoming fax is reduced to fit on one
page, if possible. If this feature is turned off, information that does not fit on the first page is printed on a second
page. Automatic Reduction is useful when you receive a Legal-size fax and Letter-size paper is loaded in the
main tray.
To set automatic reduction from the printer control panel
1. From the Home screen, touch Settings.
2. Touch Fax Setup, and then select Advanced Fax Setup.
3. Touch Automatic Reduction, and then select On or Off.
Block unwanted fax numbers
If you subscribe to a caller ID service through your phone provider, you can block specific fax numbers so the
printer does not print faxes received from those numbers. When an incoming fax call is received, the printer
compares the number to the list of junk fax numbers to determine if the call should be blocked. If the number
Receive a fax 31