HP Photosmart 7520 e-All-in-One Printer - Manual (Page 35)

TIP: In addition to creating and managing speed-dial entries from the printer’s control panel, you can also
use tools available on your computer, such as the HP software included with the printer and the printer’s
embedded web server (EWS).
This section contains the following topics:
• Set up and change speed-dial entries
• Delete speed-dial entries
• Print a list of speed-dial entries
Set up and change speed-dial entries
You can store fax numbers as speed-dial entries.
To set up speed-dial entries
1. From the Home screen, touch Settings.
2. Touch Fax Setup, and then select Speed Dial Setup.
3. Touch Add/Edit Speed Dial, and then touch an unused entry number.
4. Type the fax number and a name, and then touch Next.
NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access
code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.
5. Verify the information, and then touch OK.
To change speed-dial entries
1. From the Home screen, touch Settings.
2. Touch Fax Setup, and then select Speed Dial Setup.
3. Touch Add/Edit Speed Dial.
4. Make your changes in the fax number or the name, and then touch Next.
NOTE: Be sure to include any pauses or other required numbers, such as an area code, an access
code for numbers outside a PBX system (usually a 9 or 0), or a long-distance prefix.
Delete speed-dial entries
To delete speed-dial entries, complete the following steps:
1. From the Home screen, touch Settings.
2. Touch Fax Setup, and then touch Speed Dial Setup.
3. Touch Delete Speed Dial, touch the entry you want to delete, and then touch Delete to confirm.
Print a list of speed-dial entries
To print a list of all of the speed-dial entries that have been set up, complete the following steps:
1. Load paper in the tray. For more information, see Load media .
2. From the Home screen, touch Settings.
3. Touch Fax Setup, and then touch Speed Dial Setup.
4. Touch Print Speed Dial List.
Change fax settings
After completing the steps in the getting started guide that came with the printer, use the following steps to
change the initial settings or to configure other options for faxing.
• Configure the fax header
• Set the answer mode (Auto answer)
• Set the number of rings before answering
Change fax settings 33