Serial-type fax setup, Phone system—see – HP Photosmart 7520 e-All-in-One Printer User Manual

Page 98

Advertising

Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then
connect the other end to the port labeled 1-LINE on the back of the printer.

NOTE:

You might need to connect the supplied phone cord to the adapter provided for your country/

region.

If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.

If your modem software is set to receive faxes to your computer automatically, turn off that setting.

NOTE:

If you do not turn off the automatic fax reception setting in your modem software, the printer

cannot receive faxes.

Turn off the Auto Answer setting.

Run a fax test.

You must be available to respond in person to incoming fax calls, or the printer cannot receive faxes.

If you encounter problems setting up the printer with optional equipment, contact your local service provider or
vendor for further assistance.

Serial-type fax setup

For information on setting up the printer for faxing using a serial-type phone system, see the Fax Configuration
web site for your country/region.

Austria

www.hp.com/at/faxconfig