Case b: set up the printer with dsl – HP Photosmart 7520 e-All-in-One Printer User Manual

Page 82

Advertising
background image

1

Telephone wall jack

2

Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/
region.

To set up the printer with a separate fax line

1.

Using the phone cord supplied in the box with the printer, connect one end to your telephone wall jack, then
connect the other end to the port labeled 1-LINE on the back of the printer.

NOTE:

You might need to connect the supplied phone cord to the adapter provided for your country/

region.

If you do not use the supplied cord to connect from the telephone wall jack to the printer, you might not
be able to fax successfully. This special phone cord is different from the phone cords you might already
have in your home or office.

2.

Turn on the Auto Answer setting.

3.

(Optional) Change the Rings to Answer setting to the lowest setting (two rings).

4.

Run a fax test.

When the phone rings, the printer answers automatically after the number of rings you set in the Rings to
Answer
setting. The printer begins emitting fax reception tones to the sending fax machine and receives the fax.

Case B: Set up the printer with DSL

If you have a DSL service through your telephone company, and do not connect any equipment to the printer,
use the instructions in this section to connect a DSL filter between the telephone wall jack and the printer. The
DSL filter removes the digital signal that can interfere with the printer, so the printer can communicate correctly
with the phone line. (DSL might be called ADSL in your country/region.)

NOTE:

If you have a DSL line and you do not connect the DSL filter, you cannot send and receive faxes with

the printer.

Back view of the printer

1

Telephone wall jack

2

DSL (or ADSL) filter and cord supplied by your DSL provider

3

Use the phone cord supplied in the box with the printer to connect to the 1-LINE port.
You might need to connect the supplied phone cord to the adapter provided for your country/
region.

Chapter 12

80

Additional fax setup

Advertising