Acnodes Aficio AP4510 - Manual (Page 30)

Installing Options
20
2
JJJJ
Connect the power cord to the
Printer Hard Disk.
KKKK
Connect the connector to the
Printer Hard Disk.
LLLL
Lock the Printer Hard Disk cover
with the two screws you removed
in step
EEEE .
MMMM
Align the printer board with the
top and bottom rails in the print-
er, and then insert the printer
board slowly until it stops.
NNNN
Lock the printer board with the
two screws you removed in step
DDDD .
Note
❒ Be sure to return the screwdriv-
er to the paper tray after using
it.
The Printer Hard Disk will be for-
matted automatically when the
power is turned on.
Note
❒ Print a configuration page to con-
firm that the Printer Hard Disk is
properly installed. See "Printing a
Configuration Page" in the Printer
Reference on the CD-ROM labeled
"Operating Instructions".
Setup-F3_FM.book Page 20 Friday, October 5, 2001 8:27 PM