Acnodes Aficio AP4510 User Manual
Page 44
Configuring the Printer for the Network
34
3
IEEE 1394 Configuration
Configure the printer for using in the
IEEE 1394 environment. The follow-
ing table shows the control panel set-
tings and their default settings. These
are included in the "Host Interface"
menu.
AAAA
Press
{{{{Menu}}}}.
“Menu” appears on the panel dis-
play.
BBBB
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display “Host
Interface” menu.
CCCC
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
DDDD
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display “IEEE
1394 Setup”.
EEEE
Press
{{{{Enter #}}}}.
The following message appears on
the panel display.
FFFF
Press
{{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to display “IP
over 1394”.
A Press {{{{Enter #}}}}.
B Press {{{{U
U
U
U}}}} or {{{{T
T
T
T}}}} to select ei-
ther Active" or "Not Active".
C Press {{{{Enter #}}}}.
The display returns to the previ-
ous menu in about two seconds.
Setting Name
Value
IP Address1394
011.022.033.044
Subnet Mask1394
000.000.000.000
IP over 1394
IP over 1394
SCSI print
Active
Menu:
Host Interface
Host Interface:
I/O Buffer
Host Interface:
IEEE 1394 Setup
IEEE 1394 Setup:
IP Address1394
IEEE 1394 Setup:
IP over 1394
Setup-F3_FM.book Page 34 Friday, October 5, 2001 8:27 PM