Acnodes Aficio AP4510 - Manual (Page 33)

Installing Options
23
2
EEEE
Hold the handle, and carefully
pull out the printer board.
FFFF
Put the printer board on a flat sur-
face.
GGGG
Remove the two screws locking
the 1394 Interface Unit cover.
The screws are needed to lock the
1394 Interface Unit afterwards.
HHHH
Attach the 1394 Interface Unit to
the slot. Confirm that the unit is
firmly connected to the printer
board.
IIII
Lock the 1394 Interface Unit cover
with the two screws you removed
in step
GGGG .
JJJJ
Align the printer board with the
top and bottom rails in the print-
er, and then insert the printer
board slowly until it stops.
KKKK
Lock the printer board with the
two screws you removed in step
DDDD .
Setup-F3_FM.book Page 23 Friday, October 5, 2001 8:27 PM