HP LaserJet P3005 Printer series - Manual (Page 152)

Gray background
1. Do not use media that has already been run through the device.
2. Try using a different type of media.
3. Print a few more pages to see if the problem corrects itself.
4. Turn over the media in the tray. Also, try rotating the media 180°.
5. Open the CONFIGURE DEVICE menu at the device control panel. On the PRINT QUALITY
submenu, increase the TONER DENSITY setting. See
Print Quality submenu .
6. Make sure that the environmental specifications for the device are being met. (See Operating
environment .)
7. Replace the print cartridge.
Toner smear
1. Print a few more pages to see if the problem corrects itself.
2. Try using a different type of media.
3. Make sure that the environmental specifications for the device are being met. (See Operating
environment .)
4. Clean the inside of the device and run a cleaning page to clean the fuser. (See Clean the
device .)
5. Replace the print cartridge.
Also see Loose toner .
140 Chapter 7 Problem solving ENWW