HP ProLiant Support Pack User Manual
Page 43
HP SUM User Interface 43
Icon Text
Description
Reboot Needed
The server must be rebooted for the component to take effect.
NOTE:
Some of the Linux RPMs require the target server to be rebooted after the RPM is
installed. However, the Reboot Needed message does not appear on the Installation
Results screen for Linux RPMs since that information is not available to HP SUM. HP
recommends that you reboot the target server after installation of any Linux RPMs. To view the
list of RPMs which require a reboot, see the download page of the HP ProLiant Support Pack
for Linux on the PSP website
To view the installation result details, click View Installation Log.
The Installation Results screen also includes the following buttons:
•
Reboot Now—Reboots the server. (This button is available for local installations only.)
•
Exit—Exits HP SUM.
NOTE:
After updating hard drives in external enclosures such as MSA20, you must power
cycle the external enclosures. The Reboot button in HP Smart Update Manager only reboots
the server but never power cycles an external enclosure.