HP ProLiant Support Pack - Manual (Page 81)

Scripted deployment 81
Parameter Description Possible values
name or password.
TRUSTMODE This parameter is used by the HP Systems
Management Homepage to set up the trust
relationship mode. (Applies to Linux PSP only.)
• TrustByCert—If this
value is used, the
CERTLIST parameter
must be defined to
enable access to the
server.
• TrustByName—If this
value is used, the
XENAMELIST
parameter must be
defined.
• TrustByAll—HP does
not recommend using
this value because of
possible negative
security
consequences.
NOTE: The accepted
values are case-sensitive
and must be capitalized
as shown. Failure to do
so prevents the trust
relationship from being
set up properly during
installation and might
affect access to the web
server.
CERTLIST This parameter enables a user to provide a list of
certificate files or servers where certificates can
be obtained for trust relationships for the HP
Systems Management Homepage. (Applies to
Linux PSP only.)
Certificate file name or
Server DNS name
XENAMELIST This parameter enables a user to provide a list of
servers, separated by semicolons, for trust
relationships for the HP Systems Management
Homepage. (Applies to Linux PSP only.)
This parameter is only valid if the TRUSTMODE
parameter is set to TrustByName. (Applies to
Linux PSP only.)
Server DNS name
HPQLA2X00FO This parameter is used by the hp_qla2x00
QLogic Fibre Channel Driver to determine the
failover mode to use. (Applies to Linux PSP only.)
• SinglePath
• SecurePath
• QLogicFailure
(No default value)
HPQLA2X00FORCE This parameter is used by the hp_qla2x00
QLogic Fibre Channel Driver to determine
whether to skip detection of third-party storage.
(Applies to Linux PSP only.)
"Y", "N" (default)
Examples of the HP SUM input file include: