HP LaserJet M9059 Multifunction Printer series - Manual (Page 101)

7. Adjust the front (X) paper guide by pressing the tab on the guide and slide the guide until it gently
touches the paper.
Figure 6-20 Load custom media in trays 2, 3, and 4 (5 of 6)
8. Note the orientation of the paper, as well as the value of the X dimension and the Y dimension.
The X and Y dimensions are marked in the tray. You will need this information for a later step.
NOTE: When loading tray 4, make sure that the paper guide lock is in the up position.
9. Close the tray. The MFP control panel might show the tray media type and size. If the configuration
is not correct, touch
Modify on the control panel. If the configuration is correct, touch OK .
Figure 6-21 Load custom media in trays 2, 3, and 4 (6 of 6)
ENWW Load paper and print media 87