HP LaserJet M9059 Multifunction Printer series - Manual (Page 145)

Test the SMTP settings
1. From the Home screen, touch Administration .
2. Touch Initial Setup .
3. Touch E-mail Setup , and then touch Test Send Gateway .
If the configuration is correct, Gateways OK appears on the control-panel display.
If the first test was successful, send an e-mail to yourself by using the digital-send feature. If you receive
the e-mail, you have successfully configured the digital-sending feature.
If you do not receive the e-mail, use these actions to resolve issues with the digital-sending software:
● Check the SMTP and address to make sure that you typed them correctly.
● Print a configuration page. Verify that the SMTP gateway address is correct.
● Make sure that the network is operating correctly. Send an e-mail to yourself from a computer. If
you receive the e-mail, the network is operating correctly. If you do not receive the e-mail, contact
your network administrator or Internet service provider (ISP).
● Run the DISCOVER.EXE file. This program attempts to find the gateway. You can download the
file from the HP Web site at
www.hp.com/support/ljm9059mfp .
ENWW Configure the device to send e-mail 131