HP Deskjet F4185 All-in-One Printer - Manual (Page 13)

Light status What it means
• The print cartridge is not intended for use in this HP All-in-One.
• The print cartridge might be defective.
The On, Resume, and Check Print
Cartridge lights are blinking. Scanner failure.
Turn off the HP All-in-One, then turn it on again. If the problem persists,
contact HP Support.
All lights are blinking. The HP All-in-One has a fatal error.
1. Turn the HP All-in-One off.
2. Unplug the power cord.
3. Wait a minute, then plug the power cord back in.
4. Turn the HP All-in-One back on.
If the problem persists, contact HP Support.
Use the HP Photosmart software
The HP Photosmart Software provides a fast and easy way to make prints of your photos.
It also provides access to other basic HP imaging software features, such as saving and
viewing your photos.
For more information on using the HP Photosmart Software:
• Check the Contents panel on the left. Look for the HP Photosmart Software Help
contents book at the top.
• If you do not see the HP Photosmart Software Help contents book at the top of
the Contents panel, access the software help through the HP Solution Center.
(continued)
Use the HP Photosmart software 11
HP A
ll-in-One ov
erview