HP Deskjet F4185 All-in-One Printer User Manual
Page 94
To replace the print cartridges
1.
Make sure the HP All-in-One is on.
CAUTION:
If the HP All-in-One is off when you open the print cartridge door to
access the print cartridges, the HP All-in-One will not release the cartridges for
changing. You might damage the HP All-in-One if the print cartridges are not
docked safely when you try to remove them.
2.
Open the print cartridge door.
The print carriage should move to the center of the HP All-in-One. If the print carriage
does not move to the center, turn the HP All-in-One off, and then on.
3.
Wait until the print carriage is idle and silent, and then lightly press down on a print
cartridge to release it.
If you are replacing the tri-color print cartridge, remove the print cartridge from the
slot on the left.
If you are replacing the black or photo print cartridge, remove the print cartridge from
the slot on the right.
1 Print cartridge slot for the tri-color print cartridge
2 Print cartridge slot for the black and photo print cartridges
4.
Pull the print cartridge toward you out of its slot.
Chapter 12
92
Troubleshooting
T
roub
les
hoot
ing