HP Officejet 300 All-in-One Printer - Manual (Page 112)


4. Open the print cartridge box and
container, then grasp the print
cartridge by the green top and remove
the cartridge from the container.
Gently remove both pieces of
tape-blue and white-covering the ink
nozzles and vent hole.
CAUTIONS: 1) If you don't remove
the white tape, you deplete the ink in
the cartridge prematurely. 2) Be
careful not to touch the ink nozzles or
the copper contacts. Fingerprints may
damage them.
Remove both
pieces of tape!
5. Place the print cartridge down into the
cradle as shown. Align the green
arrow on the cartridge top with the
green dot on top of the cradle.
sl-42
6. Push the green arrow toward the green
dot until the cartridge snaps into
place.
sl-43
7. Close the top cover, then close the
front panel.
Be sure to close the front panel
firmly, until both corners snap into
place.
sl-30b