HP Library and Tape Tools - Manual (Page 22)

Figure 7 Device information screen
1. A visual representation of the selected product (the images are in grayscale).
2. Provides the following general information on the product:
•
Product ID (Inquiry String)
•
Drive Technology (DDS/DLT/SDLT/VS/LTO)
•
Mech Serial # (Drive serial number)
•
Firmware Revision
•
SCSI Target ID
•
SCSI LUN
•
HH (half height) or FH (full height)
3. If a data cartridge is inserted in the drive when the identity tool is selected (or when the current
screen is refreshed), information regarding cartridge type, capacity, barcode, partitioning
status, and write protect status is shown. If the cartridge is formatted using LTFS, the information
is displayed with the cartridge type.
4. Click this button to display a list of media that is compatible with the product, as shown in
Figure 8 (page 23) . The information provided for each type of media is:
•
Cartridge characteristics.
•
Capabilities of this drive to handle the cartridge.
•
HP part number for the cartridge.
22 Using L&TT on Windows