HP Library and Tape Tools - Manual (Page 53)

Aborting a test
Selected L&TT tests can be stopped with Ctrl-A before they complete. Check the test description to
see whether the test can be aborted.
When running a test that can be aborted, the status line displays the message Press 'Ctrl-A'
to abort the test
, as shown in Figure 29 (page 53)
Figure 29 Command line for a test that can be aborted
After you press Ctrl-A, L&TT displays a message that the abort command has been received and
that it is trying to abort the test. It can take some time for the message to be displayed and ultimately
to abort the test, as shown in
Figure 30 (page 54) .
Running the tests and utilities 53