HP PL4245N 42 inch HD-ready Plasma Television - Manual (Page 10)

4 Safety
Cleaning the TV
Use a dry, soft cloth to remove dust from the TV screen and the chassis.
•
Unplug the TV before cleaning the screen.
•
A special anti-glare coating is applied to the screen of your TV. Using solvents such as alcohol or
abrasive material such as a power towel may affect the screen coating or bezel paint.
•
Do not expose the product to volatile gas or fluid such as a pesticide.
•
Do not put the TV in contact with vinyl or rubber products for a long period of time. Extended
contact may result in the removal of the coating or degradation of the surface.
Preventing Image Retention
Your plasma TV illuminates phosphor to display images, much like a conventional tube-type television.
Viewing stationary images for extended periods of time results in uneven aging of the phosphor,
causing grayed-out images to permanently appear on the screen.
Permanent image retention can be avoided by taking some basic precautions. Following the
recommendations listed below ensures your plasma TV will have longer life and offer better
performance:
•
Whenever possible, avoid frequently displaying stationary images, such as Web sites, computer
graphics, or video games for extended periods of time.
•
Display video and images in the widescreen 16:9 ratio format. Use the Aspect button on the
remote control to change from 4:3 screen size (such as standard television) to fill the screen in
16:9 ratio. This will prevent potential image retention of sidebars. Refer to “Selecting the screen
aspect” on page 23.
•
Avoid viewing the on screen display (OSD) menus from DVD players, VCRs, and other components
for extended periods of time.
•
When watching a movie from a DVD player or VCR, do not leave the same image paused
continuously over a long period of time.
•
Turn down the contrast and brightness of the screen. High brightness and contrast can accelerate
image retention of stationary images.
Image retention and uneven screen aging are not covered by your HP Warranty; refer to the Warranty
and Support Guide that came with your TV.
Wall Mounting or Stand Replacement
A specified technician from the distributor or authorized agent should install the TV, including stand
replacement or wall mounting. Wall mounting brackets are sold separately and are not included with
the TV.
Wall mounting the TV requires:
•
Removal of the transport handles on the back of the TV.
•
Removal of the stand from the TV panel.
•
Assembly of the wall mounting bracket and installation of the bracket onto the TV panel.
•
Placement and installation of the TV panel with wall bracket onto the wall.
Due to the size and weight of the TV, it is recommended that a minimum of two people move it.