Lower video and audio connectors, Upper video and audio connectors – HP PL4245N 42 inch HD-ready Plasma Television User Manual
Page 17
Introduction
11
F Video
and
Audio
Connectors
•
Connect composite video cable and left-right audio cables for one or two
devices such as a VCR, a DVD player, or a laser disc player.
•
Connect S-video cable and left-right audio cables for one or two devices
such as a VCR, a DVD player, or a laser disc player.
•
Connect cables for component video input.
•
Connect the audio cables for a PC.
•
Connect the audio cables for composite video and S-video.
•
Connect audio left-right cables for the YPbPr input and the YCbCr input.
G
TV Antenna Cable In Connect broadcasting (terrestrial) antenna or cable TV signal cable here.
H RS232C
This terminal is used for service only.
I AC
in
connector
Connect the included power cord.
Lower Video and Audio Connectors
Use these connectors to connect composite devices, S-video devices, component devices, audio
receivers, subwoofer out, TV video out, and audio out.
Upper Video and Audio Connectors
Use the green (Y2), blue (Cb2/Pb2), and red (Cr2/Pr2) inputs to connect the video cables from
devices that support High Definition signals such as a progressive scan DVD player, or a digital cable
or satellite set-top box. This connector supports 480i, 480p, 720p, and 1080i format video signals.
Use the audio inputs to connect the audio cables from the same component.