HP PL4245N 42 inch HD-ready Plasma Television - Manual (Page 16)

10 Introduction
Rear Panel
Identifying connectors
Item Description
A External speaker
left and right output
Connect the external speakers.
B Main power switch Turns the AC power on and off. This switch is on from the factory. When this
main power switch is off, the TV is fully unpowered; the power/standby
indicator light on the front of the TV is off, and neither the front panel power
button nor the remote control can be used to turn on the TV. If you turn the
main power switch off, wait at least 5 seconds before turning it on again.
C Component Video
Inputs
Connect cables for component video input.
Use YPbPr/YCbCr Component Input from devices that support High
Definition signals such as a progressive scan DVD player, or a digital cable
or satellite set-top-box. This connector supports 480i, 480p, 720p, and
1080i format video signals.
D DVI-D with HDCP
(29-pin) input
Connect a digital video cable for digital input signals from a PC monitor
connector, or from a DVD player, digital cable or satellite receiver
set-top-box.
E VGA, a D-sub
(15-pin) input
Connect an analog RBG-type cable for analog input signals from a PC
monitor connector. See your component user documentation for information
about the connector types it supports.