HP OneView for VMware vCenter - Manual (Page 48)

2. For detailed networking information, click More at the bottom of the Networking portlet or do
one of the following:
•
From the vSphere Client, select Networking from the drop-down list.
•
From the vSphere Web Client, click the Networking tab on the Manage page.
The Network Detail view is displayed. Click Network Diagram to see a diagram of the network.
The following networking information is displayed.
•
Host Network Configuration—Includes host configuration, virtual connect information,
and reference host information.
•
Network Interface Controllers—detailed information about each NIC
•
vSphere Standard Switches—information about each switch, including name, ports, and
port groups.
•
vSphere Distributed Switches—information about each switch, including Name, Downlink
Port Groups, and Uplink Port Groups.
•
Virtual Connect information
•
External switch information
Host network configuration
NOTE:
•
This feature is available only in the vSphere Web Client.
•
If management network is not specified, a status of Unknown is displayed at the top of the
Networking Portlet in the Overview page. On mouse-over, a pop displays the message
Management Network may not be specified.
•
The host network configuration feature is not supported for hosts running the ESX classic
version.
TIP: Mouse-over the Host Network Configuration status icon to display a pop-up describing the
status.
48 Using Insight Control for vCenter