Viewing cluster storage information, Cluster storage summary information – HP OneView for VMware vCenter User Manual
Page 64
This section lists the datastores provisioned from the selected host to VMs. For each datastore,
move the cursor over the status bar to view storage information.
The following information is displayed for each datastore:
•
Virtual disks—Number of virtual disks on datastores provisioned from the selected host to VMs
•
Total—Amount of storage provisioned on the host as virtual disks (VMDKs or RDMs)
•
Used—Amount of storage used on the host as virtual disks (VMDKs or RDMs)
•
% Savings—Amount of storage saved through the use of VMware-based thin provisioning
Available HP StoreOnce Backup Systems
This section lists the HP StoreOnce Backup Systems available. For each HP StoreOnce Backup
System, move the cursor over the status bar to view storage information.
For each configured backup system, all the service sets are displayed. For each service set the
following information is displayed:
•
Used—The amount of data stored on the service set by the services on the service set.
•
Total—Total amount of storage on the service set.
•
Deduplication Ratio—The deduplication ratio of data stored on the service set.
Viewing cluster storage information
To view storage information for a cluster:
1.
Select a cluster in the inventory tree and access HP Insight Management.
The Storage portlet on the Overview page provides an overview of the storage.
2.
For detailed storage information, click More at the bottom of the Storage portlet or do one of
the following:
•
From the vSphere Client, select Storage Details from the drop-down list.
•
From the vSphere Web Client, click the Storage tab on the Manage page.
The storage details page appears.
3.
Click Summary.
The cluster storage summary displays information about HP storage and includes a graphical
representation of the information. For more information, see
Viewing detailed cluster information
Click the Storage Volumes, Virtual Disks, HBAs, Paths, Replications, or VMs to Volumes tab to view
detailed information about the selected cluster. For information about the values displayed in these
tabs, see the following:
•
“Viewing storage volumes” (page 69)
•
“Viewing virtual disks” (page 71)
•
•
•
“Viewing replications” (page 74)
•
“Viewing VMs to volumes” (page 76)
Cluster storage summary information
The storage summary displays the following information about the selected cluster:
64
Using Insight Control for vCenter