HP StoreAll Storage User Manual
Page 153
{root@ib48-205]# ibrix_objectstoreadmin -l -c
Container Sync Config
=====================
Backup Type IPAddress/FQDN
------------- --------------
Backup Target 10.2.11.10
•
Example command, set up the backup server:
[root@ib11-10]# ibrix_objectstoreadmin -a -s 10.2.48.204,10.2.48.205
Command succeeded!
[root@ib11-10 fsutil]# ibrix_objectstoreadmin -l -c
Container Sync Config
=====================
Backup Type IPAddress/FQDN
------------- --------------
Backup Source 10.2.48.204
Backup Source 10.2.48.205
5.
Assign a Sync-To and Sync-Key to source cluster containers and the same Sync-Key to the
target cluster containers. See
“Assign container sync values to the source container and target
container for backup” (page 153)
for the steps.
Assign container sync values to the source container and target container for backup
Once the source server and backup target servers are configured, identify source containers that
will be synced, from source servers. To configure container sync, the source container must have
a Sync-To value and a Sync-Key value set. The target container only requires the Sync-Key to be
set. The Sync-To value is the path (endpoint) to the target container. The Sync-Key is a shared key
that is set on both source and target containers to authenticate the container-sync operation.
Both source containers and their target container must share the same Sync-Key.
NOTE:
The backup target container should have the same name as the backup source container
if the source container has segmented objects.
To create a common sync key among containers:
Synchronization of containers
153