HP XP Racks - Manual (Page 160)

Procedure 11 To change an access attribute to read-only or protect
1. Navigate to the Remote Web Console as a user assigned to the Storage Administrator
(Provisioning) role.
2. In the Remote Web Console main window, click Actions > Other Function > Data Retention
to open the Data Retention window.
Figure 11 Data Retention window
3. Click to change to Modify mode.
4. Select an LDKC number in the LDKC list, select a group that the CU belongs in the CU Group
list, and then click a CU in the tree.
5. Right-click a volume whose access attribute you want to change. You may select multiple
volumes.
6. Select Attribute, and then select Read Only or Protect.
Figure 12 Selecting Access Attribute
7. In the Term Setting dialog box, specify the retention term. During this period, the access
attribute cannot be changed to read/write. You can enter the number of years and days, or
select Unlimited. The retention term can be extended but cannot be shortened.
•
years: Specify the number of years within the range of 0 to 60. One year is counted as
365 days, whether the year is a leap year.
•
days: Specify the number of days within the range of 0 to 21900.
For example, if 10 years 5 days or 0 years 3655 days is specified, the access attribute of
the volume cannot be changed to read/write in the next 3,655 days.
160 Configuring access attributes