HP XP Racks - Manual (Page 249)

Description Item
Some undefined LDEV IDs may appear. A hyphen in the LDEV name indicates the LDEV
is undefined.
LDEV names to be deleted from the resource group. LDEV Name
Parity group ID where the LDEV belongs. Parity Group ID
Pool name where the LDEV belongs. Pool Name (ID)
Capacity of each LDEV. Capacity
Provisioning type of each volume. Provisioning Type
Basic: Internal volume
THP: V-VOLs of Thin Provisioning or Thin Provisioning Z
External: External volume
External MF: Migration volume
Snapshot: Fast Snap volume
Attribute of the volume indicating how the LDEV is being used. Attribute
•
Command Device: Command device.
•
Remote Command Device.
• JNL VOL: Journal volume.
•
Pool VOL: Pool volume. The number in parentheses is the pool identifier.
• TSE: TSE-VOL.
•
Hyphen (-): Volume in which the attribute is not defined.
Journal ID when the attribute is JNL VOL. A hyphen indicates the attribute is other than
JNL VOL. Journal ID
Total number of selected LDEVs. Total
Selected Ports table (when deleting ports)
Description Item
Port IDs that to be deleted from the resource group. Port ID
Attribute of the port indicating I/O flow. Attribute
•
Initiator: Issues I/O commands to a target port when I/O is executed between storage
systems with Continuous Access Synchronous, and so on.
• Target: Receives I/O commands from a host.
•
RCU Target: Receives I/O commands from an initiator when I/O is executed between
storage systems with Continuous Access Synchronous, and so on.
• External: Issues I/O commands to a target port of an external storage system with
External Storage.
•
HTP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the external storage system.
•
FNP: Use this port when the external volume is mapped to the local storage system.
Specify this port to the local storage system.
Total number of selected ports. Total
Remove Resources window 249