HP XP Racks - Manual (Page 163)

Remote Web Console secondary windows must be defined for use in advance. When you select
Modify from the Data Retention secondary window to disable an S-VOL, other users or programs
are prevented from changing storage system settings. When you close the secondary window,
Modify mode is released. For more information on Remote Web Console secondary windows and
Modify mode, see the HP XP7 Remote Web Console User Guide.
Procedure 15 To reserve volumes
1. Navigate to the Remote Web Console as a user assigned to the Storage Administrator
(Provisioning) role.
2. In the Remote Web Console main window, click Actions > Other Function > Data Retention.
3. Click to change to Modify mode.
4. In the Data Retention window, select an LDKC number in the LDKC list, select a group that the
CU belongs in the CU Group list, and then click a CU in the tree.
5. Select a volume where the Reserved column contains a hyphen. You may select multiple
volumes.
6. Right-click the selected volume or volumes, and then select Reserved > Set.
7. Click Apply to apply the setting.
To permit users to make LU path settings and command device settings on a volume, follow the
steps above and select Reserved > Release. Then call HP Technical Support to ask for SVP settings.
Reserving volumes 163