HP XP Racks - Manual (Page 26)

If the pair is created under the above conditions, the following are displayed as results of executing
the pairdisplay command:
•
Serial number of the virtual storage machine in the Seq# field
•
Virtual LDEV number in the LDEV# field
You can create pairs by specifying both of the following in the HORCM_LDEV parameters of the
configuration definition file:
•
Serial number of the physical storage system in Serial#
•
Physical LDEV number in CU:LDEV(LDEV#)
If the pair is created under the above conditions, the following are displayed as results of executing
the pairdisplay command:
•
Physical serial number of the virtual storage machine in the Seq# field
•
Physical virtual LDEV number in the LDEV# field
CAUTION: You can create pairs by specifying both of the following in the HORCM_LDEV
parameters of the configuration definition file:
•
Serial number of the physical storage system in Serial#
•
Physical LDEV number in CU:LDEV(LDEV#)
For pairs created under the above conditions, the device information that is recognized by the
server and the device information that results from executing the pairdisplay command are different.
Program product operations for resources in a virtual storage machine
For data management operations that involve virtualized resources in a virtual storage machine,
you can perform data management operations that specify conventional physical resources or
virtualized resources. However, data management operations that specify IDs of virtualized resources
are limited. For details about data management operations for virtualized resources, see HP XP7
RAID Manager User Guide.
26 Managing Virtual Storage Machine Resources